Here is the connection diagram (again, by hand) and the final iteration of the code.
Later edit:
This is the final look after some work on a test PCB. I let the USB port accesible for future development:
20 March 2017
Kenwood AT-300 ATU to ICOM Radio - II
In a previous post I wrote about a devil plan to connect a Kenwood AT-300 Automatic antenna tuner to an ICOM 7300 radio.
Here is the connection diagram (again, by hand) and the final iteration of the code.
Later edit:
This is the final look after some work on a test PCB. I let the USB port accesible for future development:
Here is the connection diagram (again, by hand) and the final iteration of the code.
Later edit:
This is the final look after some work on a test PCB. I let the USB port accesible for future development:
Subscribe to:
Post Comments (Atom)
Most viewed posts in last 30 days
-
Despite the rumors, the Russian are not using Baofeng Two Way radios in Ukraine invasion. They are using more modern and advanced communicat...
-
Well, after testing a lot of ESP32 development boards, I found that the little ESP32 D1 Mini is an excellent one. First of all, it is ve... -
I was playing with this circuit but the audio was crap. Looking into the circuit's datasheet I found that this is a real treasure by...
5 comments:
Dear Dan, I am going to build this great project to connect mt Kenwood AT50 to my IC703! Just need to know how to upload this program into the arduino. It is not written in the Arduino language . Many thanks for your help ! Leon on4lkc
Hi Leon,
It's written in C for Arduino IDE so it is full compatible!
73 de Adrian
Hi Dan, I hope you are all well.
I would like to thank you for your work to carry out this project. This weekend I hope to try it. I'll tell you.
A greeting.
EA1FEZ, Agustin
Hi Dan, I hope you are all well.
I would like to thank you for your work to carry out this project. This weekend I hope to try it. I'll tell you.
A greeting.
EA1FEZ, Agustin
Post a Comment