Finally, the schematic of Xiegu G90 is available!
Here they are, in pdf format.
The board revision is 2.0.6. I have 2.0.7 revision and there are some minor modifications, especially in the power supply line (reverse protection).
Abonați-vă la:
Postare comentarii (Atom)
Most viewed posts in last 30 days
-
Kenwood Programing Software FIRMWARE: KDS-100 504XXXXX 4A46 PTT ID Display feature 176.86 KB CURRENT 401XXXXX F7FC Corrects lock up whe...
-
Icom programming Software GM-110SC rev.1.2. ex1725. IC-3FX 245MHZ THAILAND CB HANDY RADIO, EX2020 REV 1.0. IC-3FGX 80 CHANNELS 245MHZ THAILA...
-
Icom IC-7300 wide band modification by PA2DB: Remove bottom and find the diode matrix (near big chip) Open RX 0.030-74.8Mhz (REMOVE D...
3 comentarii:
Thanks Adrian
Is a good news!
I have 2 radios and one does not transmit (not rf power) some times...
Maybe this help me
eb3am
Jordi
Hello Adrian,
can You help me.
I need the bootloader.bin filr for the G90 Display.
My email is dc7zo@darc.de.
Kurt DC7ZO
Thanks.
Thank you very much for posting the schematics ! I
My G90 broke and this will be a great help.
Trimiteți un comentariu