30 iulie 2012
Stratospherium II - 2012 High Altitude Balloon launch on August!
This time, the balloon will have some scientific experiments on board and the APRS position and telemetry will be sent on 144.850 MHz in order to give a chance for foreign radioamateurs to directly receive the beacon.
We will digipeat the beacons onto 144.800 MHz in order to put Stratospherium II onto the APRS.FI via local I-Gates.
The photos and the movie from the onboard cameras will be available soon after the flight.
By looking around the flight area on www.aprs.fi, you will see the tracking team following the balloon.
Receiving reports are welcome to firstname.lastname@example.org
The beacon will be transmitted into a dedicated antenna (kind of turnstile) with 5 W output power at every 12 seconds.
The telemetry (via APRS) will include: Main battery voltage, the payload internal temeperature and the external temperature.
For last minute informations, check: www.yo3ksr.ro
73 de Adrian Florescu, yo3hjv
Some images from Stratospherium I - 2011.
Video from onboard camera from Stratospherium I - 2011.
Kenwood Programing Software FIRMWARE: KDS-100 504XXXXX 4A46 PTT ID Display feature 176.86 KB CURRENT 401XXXXX F7FC Corrects lock up wh...
Icom programming Software GM-110SC rev.1.2. ex1725. IC-3FX 245MHZ THAILAND CB HANDY RADIO, EX2020 REV 1.0. IC-3FGX 80 CHANNELS 245MHZ THA...
Yaesu Vertex Programming Software Yaesu, Standard, Vertex, Stabo, etc,,. YAESU-VERTEX-STANDARD-MARANTZ: Yaesu Handheld Radios: ADMS-1C Ad...
Looks to me like Kenwood decided to comite suicide! In a market divided between Yaesu and Icom as ham equipment producers, each one with ...
LATER EDIT: Here you can find a solution for a "military-like" backpack radio based on FT857D. TIP for mobile useres: Two male RJ...
Icom IC-7300 wide band modification by PA2DB: Remove bottom and find the diode matrix (near big chip) Open RX 0.030-74.8Mhz (REMOVE D...