Well, a long time ago, a bad guy stole my Kenwood TM V71 Front panel from my car. So I had a main unit without a front panel so I bought a second Kenwood, a TM-D710.
I used the RC-D710 from one radio to another but was too big to put it in my new car.
Today, my TM-V71 have again a front panel (thanks for Difona and Kenwood Europe)!
Something still missing. Yes, the cable between the radio and the Panel!
I do have an extension kit DFK-3D so I took the diagram from the existing cable.
The original Kenwood part name I believe is 881H07-4370-02.
Most viewed posts in last 30 days
Icom programming Software GM-110SC rev.1.2. ex1725. IC-3FX 245MHZ THAILAND CB HANDY RADIO, EX2020 REV 1.0. IC-3FGX 80 CHANNELS 245MHZ THA...
Kenwood Programing Software FIRMWARE: KDS-100 504XXXXX 4A46 PTT ID Display feature 176.86 KB CURRENT 401XXXXX F7FC Corrects lock up wh...
Icom IC-7300 wide band modification by PA2DB: Remove bottom and find the diode matrix (near big chip) Open RX 0.030-74.8Mhz (REMOVE D...